Search results

Sucks. Tree hugging libs are slowly winning. This is just the beginning.

Used a cheap purple Harbor Freight gun drilled to 2mm but with how I used it the regular 1.4 tip would have been better. I thinned the Raptor to 20% gun pressure was at 60 psi, flow valve was set at 3 turns open. When we sprayed my sons truck with white, the flow valve was wide open and it was...

Watching "Fail Army" videos does not inspire confidence in me. But the right tool always makes a job much easier, sometimes only the mechanic has that tool.

Look forward to wheeling with all of you.

Ouch, don't risk running it. Overheating the engine will be far more money than paying someone to extract the broken bolt.

That's second pic, it's a head scratcher. The first pic is correct.

Rock Auto and several other websites say the BCM 25816709 is the same for 06-08 including Alpha. 09-12 H3 & Colorado/Canyon use 20987862.

Sprayed all the plastic trim also. close up of trim installed.

Makeshift paint booth. Comparing the new Raptor with the old paint. Comparing old Line-X to new Raptor.

Decided to strip all the trim off the H3 and finish my "paint" job, dessert pinstriping was getting bad and clear coat was starting to flake off. 3 years ago I sprayed the roof and hood, the clear coat was pealing off and looked horrible, typical GM problem. The roof and hood have held up...

When it is binding, do you hear any noise? Clicking type noise points to a bad CV, NAPA is crap as are almost all aftermarket CV's. If there is no noise when steering wheel is straight, the likely culprit is TC is stuck in 4H Locked. Ditto what Doc Olds said the tranny is well beyond normal...

I don't mind cutting the old connectors off and installing them on the new mirrors. Was hoping there was someone that already had documented this. Looks like I'll be the guinea pig.

Incorrect, both are the same with inserts with bolts, no studs. I know with other models the outside mirrors will be pre wired for heaters, GM may have thought about adding it before the axe. Silverados are a good example.

I see 2 different model numbers for the side mirrors, only difference I can make out based on pictures online are the color of the connectors. They look like a 3 pin flat connector. The mirrors for the 08-10 years are a lot cheaper. Both numbers are for right side. 06-07 is 15884835 08-10 is...

Good catch, I missed the Rancho part.

Pop and squeal is not a typical sign of water pump failure. Make sure all the hoses are good. Top the reservoir off and fill the radiator leave the cap on and idle the engine. Look for leaks at all the hose and cap bleed hose, the radiator cap may be bad and will blow coolant out. As for Dex...

It's great. It does sway a little because I don't have a front sway bar. Other than that nothing ugly at all. It is a dedicated trail rig so it only sees highway miles to/from the trail.

Yeah, that ain't going to happen. Sounds like I'll just tape the rubber.

Has anyone removed or replaced the 4 side window rubber seals? Going to be spraying Raptor liner next week and those are the only items left to pull.

Should be flush. https://hummer4x4offroad.com/forum/threads/premium-front-differential-axle-bushing-for-06-10-hummer-h3.12495/