Search results

So sorry for your loss. Welcome, hope we can help with your issues. If I recall correctly from my troubleshooting, that wire might be the antenna for the TPMS. If everything else is fine, just ignore the TPMS warning light, a single push of the reset button and it is gone until you restart...

It might be the antenna. Mine has been ignored for many years.

Well, let's see if the third time is a charm. Dropped off the new to me 6.2 at the shop for a rebuild. It could have been sooner, but the wife decided that the motor funds were better suited to a bathroom remodel. 6.2 L92 will be punched to a 416, Truck Norris cam and mostly stock everywhere...

Time to get those hands dirty Paul. Change the oil and pack your bag. Time to put some dirt under those tires.

Kind of true. For a smoother texture, you need to thin the Raptor out with urethane reducer. The Schutz gun flows a lot and may be too much for spraying a fender. The popular choice is the cheap purple gun from Harbor Freight. I thinned with 10% reducer on my H3 at 50 psi and 20% on my son's...

LOL, out of the budget. Although I hear there is one for sale from Tsar Trail.

Sand enough to remove the clear coat is all you need to do. I've done a couple trucks with Raptor but never paint, will be nice to see your results.

Congrats, Chris, on the family expansion.

Unless you have a real attachment to your H3, I would suggest you sell it and buy a clean H3 with no rust. Here in SoCal, H3s are going for as little as $2500. It will save countless headaches and might save you some cash. H3s are known for parasitic drains. The OnStar is obsolete and is a...

I might be wrong, but I don't see the rear locker button indicating it is an Adventure package. The locker and 4:1 TC are major selling points, and without them, 3K is high.

Woo whoo, I'm ready. Will be solo this year

There are several sensors that can throw the SS code. Need a good code reader to identify the faulty sensor. Mine was steering wheel position sensor.

If you don't already have a flaring kit and the tube, $40 is not bad for a pre-bent set.

A recall on the blower resistor harness many years ago. Yours may be original and could be the problem.

The HD fan clutch will make more noise. It's all the air moving, that's a good noise.

Welcome to H4O.

Good find, might help to lower the Hummer tax on parts.

I have had LEDs in all the interior locations for years with no issue, might replace the vanity with different bulbs. The FV on the LED may be causing issues.

Yep, LS common problem, I've had to install clamps on 2 different manifolds/heads. Frustrating job sometimes but cheap and will last a long time.

That's an awesome story. Been to PM many times, no surprise you made it with extensive damage, did you go down Heart Attack Hill?