Just finished this up today. Pretty easy project and I think it looks pretty cool.
Supplies:
10x15 pan
Paint
M10-1.5 bolts
Washers/grommets
Silicon
Rear view camera
Wires, tape, solder, crimp connections or whatever you want to use
Used a 1" hole saw to cut the hole for the camera and filed it down to fit perfectly and applied silicon on the back so it would tighten down nice and snug.
Put on a decal I got on eBay for 2.75 shipped, applied a matte clear coat and slapped it all on. This is how it came out. Not perfect but a good alternative at $10 for a lasagna pan.
Supplies:
10x15 pan
Paint
M10-1.5 bolts
Washers/grommets
Silicon
Rear view camera
Wires, tape, solder, crimp connections or whatever you want to use
Used a 1" hole saw to cut the hole for the camera and filed it down to fit perfectly and applied silicon on the back so it would tighten down nice and snug.
Put on a decal I got on eBay for 2.75 shipped, applied a matte clear coat and slapped it all on. This is how it came out. Not perfect but a good alternative at $10 for a lasagna pan.