TAPDH3T's H3T Build

[TAPDH3T]

Blind people much?

Surprisingly no! I have not had one person flash me yet. I have had the several months now and no issues so far. I Angled them in a manner that I would have to be riding your a$$ to cause problems... I used spot pods that are 3800 lumens!

 

[TAPDH3T]

Do you have any writeup or source for the grille you have?

Mike from forge industries.. His IG is @forgeindustries

 

[TAPDH3T]

Had to replace the radiator on the 5.3L.. For those who don't know there are clips at the very bottom which seperate the bottom so u can pull out without moving fan.. I did not find this out until I bought a clutch fan wrench and removed the fan..

I also started the process of venting my stock hood louvre.. Crappy photo cause it started to rain..

 

[GreatDaneHummer]

Why no winch?

 

[TAPDH3T]

Why no winch?

I have a removable reciever I have not installed up front yet!!! Lmao goal is to beable to winch front and rear.

 

[TAPDH3T]

Major difference.. Yellow is where I used to sit!!!

 

[GreatDaneHummer]

They do make one with a winch cut out more traditional correct? Having those big 37" tires and pushing the 5.3l do you brake a lot of CV shafts etc off roading?

 

[TAPDH3T]

They do make one with a winch cut out more traditional correct? Having those big 37" tires and pushing the 5.3l do you brake a lot of CV shafts etc off roading?

Yes sir they do make make them that way.. They will build however you want it...

As for breaking stuff lucky I have not yet.. Now I do replace more lol but haven't broken anything just quit yet..

 

[H3Wolf]

Yep

How did you get these going in there, looks awesome

Sent from my SM-G920V using Tapatalk

 

[GreatDaneHummer]

What did you do with the center crash bar with your dual fan setup?

 

[TAPDH3T]

How did you get these going in there, looks awesome

Sent from my SM-G920V using Tapatalk

Had to place them in the oven and after a certain point in time I pulled em out used flat head screwdrivers to pry apart. I used easy off oven cleaner to strip the chrome and repainted with bedliner. (Tape off sealed area to reseal) used washers to fill in the light area and mount the pod!!! Then reseal

 

[TAPDH3T]

What did you do with the center crash bar with your dual fan setup?

I used a sawzaw to notch around the center bar and mounted the fans to it...

 

[1DIRTYH3]

Your H3 keeps looking better each time you update! Love the new wheels... Fuel rocks. I went with the Hostage, but really like how the Assault looks.


Sent from the road...

 

[GreatDaneHummer]

Why go through all that and seal them back up when they are an outdoor etc LED? Why not just remove the head lights and mount a flush pair recessed a little aft? Just wondering and thinking of doing this myself. I like the idea of it using Rough Countries Black Series with only 1920 Lumens so only a little above the legal 1815... That way you would not take much crap from any officers even if they did stop you?

 

[H3Wolf]

I would imagine that as long as it's angled right they shouldn't care too much, or they might not know a huge difference with the extra 100 lumen. Maybe just speculating. I kinda want to do this too.

Sent from my SM-G920V using Tapatalk

 

[TAPDH3T]

Why go through all that and seal them back up when they are an outdoor etc LED? Why not just remove the head lights and mount a flush pair recessed a little aft? Just wondering and thinking of doing this myself. I like the idea of it using Rough Countries Black Series with only 1920 Lumens so only a little above the legal 1815... That way you would not take much crap from any officers even if they did stop you?

I wanted to keep the headlight look.
I thought about having a sheet metal blank made and flush mount but backed out on that.. Overall I didn't want just a big hole from where the headlights set so went with the custom headlight look...

 

[GreatDaneHummer]

Is there a way to get a good few pictures of how the back of them look / mounting in the plastic? I want to take this challenge on soon. I really like the idea of upgrading this way over the expensive balb upgrade. Plus if it fails put a new one in for cheaper than most of the balbs anyways.

 

[TAPDH3T]

Is there a way to get a good few pictures of how the back of them look / mounting in the plastic? I want to take this challenge on soon. I really like the idea of upgrading this way over the expensive balb upgrade. Plus if it fails put a new one in for cheaper than most of the balbs anyways.

Yea I will get some pics for ya!!!

 

[TAPDH3T]

hey guys, sorry I have been gone for so long. I forgot my password. BUT, I'm back and have several new upgrades...

 

[Peep]

:corn:

 

[4speedfunk]

Hmmmm. Upgrades? What could it possibly be?


Sent from my iPhone using Tapatalk

 

[H3Wolf]

Let us see! Let us see!

Sent from my SM-G920V using Tapatalk

 

[GreatDaneHummer]

Ummmm........? :gaah::huh:

 

[Gunner_45]

Freakin' tease..................

 

[RamRod]

Forgot his password already!


Sent from my iPad using Tapatalk