• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

Rear bags

rsc

Well-Known Member
Messages
1,087
Location
Tulsa
No, for that you should look into extended bumpstops up front. A leveled H3 will put the oem bumpstops about 1/4-3/8" off the lower arm and that gap is what causes the extra dive under breaking. There are 2 sizes of longer bumpstops iirc, the shorter of the two is fine. The longer one tends to pop out offroad.
 

954paulo

Well-Known Member
Messages
467
Location
ny
thanks but iv had the longer bump stops and leveled front for over 2 years.
 

rsc

Well-Known Member
Messages
1,087
Location
Tulsa
You may want to try the Alpha torsion bars, its a higher rate for the additional weight of the Alpha up front. The stock springs are marginally sprung for a stock I5, with a winch up front and UCP the vehicle weight is too much for good control imo.
 

Bigunit

Hammer Down!
Staff member
Messages
6,561
Location
Arizona
I am really loving my ride with the Alpha t bars.

Sent from my XT1080 using Tapataint
 
Top