H3/H3T stuff - armor and a bed box

[skeptic]

everything is sold - H3/H3T stuff - armor and a bed box

Update - All items sold.

Ok, wow, I thought I was doing the thumbnail thing not full on photos. Can someone tell me how to fix this?

Local pick-up preferred. I don't know actual shipping costs, but I'll figure that out if someone wants something shipped and there are no local buyers. I'm lazy, I don't want to dicker, and the wife wants them gone. $100 each + actual shipping.

Hunner skids, new and never installed.

OEM UCP (underbody shield), some scratches and surface rust but structurally sound and unbent. That's dirt, not rust, in the picture showing the top side.

Rocky Road H3T super sliders, scratches and surface rust. Structurally sound and unbent. Probably want to sand and bedliner them before installing.

OEM (I believe) H3 brushguard. I sanded and bedlinered this before installing it. Light surface rust in a couple areas (see photos). It only has 1 of the 2 rubber pad/isolator things, but I ran it like this on my H3T without issue. You can kinda sorta see this in the first pic, I tried to get a pic of the missing rubber bit but it's hard to see.

Finally, an H3T bed box. Demo unit, good condition but has some light surface scratches. One side you have to hold in the button when closing the lid to get it to latch (fixed by adjusting something?), and the locks work with any H3 key. Comes with all mounting hardware. $50 + actual shipping

Hit the max number of photos, here are links to a couple more of the bed box:
http://i19.photobucket.com/albums/b184/skeptic_always/H3t/20130714_133318_zpsdafd4d7e.jpg
http://i19.photobucket.com/albums/b184/skeptic_always/H3t/20130714_133329_zps0e5cc647.jpg
http://i19.photobucket.com/albums/b184/skeptic_always/H3t/20130714_135336_zpse8942230.jpg
http://i19.photobucket.com/albums/b184/skeptic_always/H3t/20130714_135350_zpsbd297375.jpg

 

[RamRod]

Pm on its way about the boxes

 

[Panzer07]

I'm interested on the ucp what would shipping be for zip code 91762.


Sent From Someone Else's iPhone 'Cause I'm Too Broke To Own One.

 

[Airborne]

I am here in youtaw, where are you located? I would love to come and take a look at these. I was looking to buy everything you have listed. I will prob take it all if it looks good.

 

[skeptic]

I'll take everything to UPS this weekend to get actual shipping costs, as well as to give locals first shot (I really don't want to ship this stuff but I want it gone). Unless someone local comes forward by this weekend, RamRod has first shot at the bed box and Torres has dibs on the UCP.

Anyone interested, please post or PM me your zip code so I can get shipping info. I'll try to get shipping costs to a couple semi-random zips as well just to get an idea of what other areas may cost.

Just so there is no confusion, the truck bed box is ONLY the large behind the cab one, the small side box that's partially in the picture went with the truck.

 

[skeptic]

I am here in youtaw, where are you located? I would love to come and take a look at these. I was looking to buy everything you have listed. I will prob take it all if it looks good.

Clearfield - just off Antelope at the edge of Layton.

edit: Just a wild guess, but by your "Airborne" screen name I'd bet you are somewhere near Hill which puts you pretty close. If you buy everything else, I'll give you the truck box free.

 

[Airborne]

then we live in the same neighborhood. by the freeport center south gate?? Ya I want to look at them today

 

[Airborne]

small world. but no I'm in 19th SFG (A)

edit
wait nm I know exactly where you are you used to have the white T. Ya we live in the same neighborhood you have the black h2 now. I will pm you my cell.

 

[skeptic]

Heh heh, yep, that's me. Had a yellow H3 for a short time, then white H3T, now a Black H2.

Got your PM and replied. Short version, I'm available anytime after 3:30pm - I'll call you then.

 

[Airborne]

Got it. I would love that work sched!!! ok see you tonight then

 

[RamRod]

Airborne can have dibs over me for the truck box if he shows up and picks it up in person, if he doesn't take it then I would like a quote for shipping to the address I sent ya


Sent from handheld smoke signal device

 

[Panzer07]

Same here if airborne doesn't take the UCP I'll take it if shipping is right.


"If you pick up a starving dog and make him prosperous, he will not bite you; that is the principal difference between a dog and a man."
-Mark Twain-

 

[Airborne]

Guys I'm sorry I didn't mean to step on any one's toes here. I literally live 200 yards from him and will be by tonight to pick the stuff up.

 

[cdarveaux]

Interested in the RR!

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[skeptic]

You're all making me feel like I'm waaaaay under pricing this stuff. That's ok with me, I want the stuff gone and I'd rather sell cheap to someone on this site that will actually use the stuff for wheeling.. This is Hummer 4x4 Offroad after all. If all I cared about was top dollar I'd have posted on e-bay and just posted links here.

You know what's surprising, I really thought everyone would be after the brush guard...

 

[RamRod]

Already found myself a brush guard


Sent from handheld smoke signal device

 

[skeptic]

All sold.

 

[cdarveaux]

Including the sliders?

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[skeptic]

Including the sliders?

Sent from my SAMSUNG-SM-N900A using Tapatalk

Yes. However, I wouldn't be surprised if he re-sells those. I didn't realize until he showed up that he has a 3, not a T. I sold everything for $400, so even if he threw the sliders in the garbage it's still a good deal. I think he may try to re-work the sliders to fit his 3 - cut off the ends and re-work the curves then cut off and re-weld the mounts?

 

[Airborne]

Thanks again Jack. Great guy to work with. Even delivers!!! Ha ha even if it's just down the street. Look forward to wringing out your H2 here soon.

 

[Airborne]

Yes. However, I wouldn't be surprised if he re-sells those. I didn't realize until he showed up that he has a 3, not a T. I sold everything for $400, so even if he threw the sliders in the garbage it's still a good deal. I think he may try to re-work the sliders to fit his 3 - cut off the ends and re-work the curves then cut off and re-weld the mounts?

Still seeing what I want to do with that. The rr were the ones I wanted to pick up either way. I am going to look hard at them tomorrow to see what it will take to get them to work on a standard 3.

 

[Veaters_h3]

I'll take the skids if they fit an h3. I dented my leaf spring mount. Or can you post the link in here for the skids. Can't find them online. I'm kind of new on here. Thanks! And I'm in north eastern Nevada!

 

[silvrzuki77]

Dang missed out on the bed box!

 

[skeptic]

I'll take the skids if they fit an h3. I dented my leaf spring mount. Or can you post the link in here for the skids. Can't find them online. I'm kind of new on here. Thanks! And I'm in north eastern Nevada!

Sorry, Airborn stopped by and decided to take everything. I (my wife) wanted it all gone ASAP. Airborn is willing to try to modify the sliders to make them fit. Win-win.

As for the skids, I assume you are referring to Hunner skids. They are (were) made buy Hunner, a member of this site. Here is a nice long thread: http://www.hummer4x4offroad.com/forum/showthread.php?294-HUNNER-EXtreme-SKIDS&highlight=hunner+skids

There are other options out there: http://www.rubberduck4x4.com/store/pc/Hummer-H3-H3-Rear-Axle-Skid-Plates-191p487.htm and some kind of low profile shock mount that I believe DesertH3 among others is running. I don't know where to get one of those though, nor do I know where to get front shock mount skids now that Hunner stopped making them.