• Welcome to H4O! For a reduced ad experience, please login or register with the forum.

H3 Need Help Identifying Part

ZoroTheGreat

Well-Known Member
Messages
55
Location
La Verne, California
I was wondering what the clear plastic lenses over the headlights and turn signals are called. They're the ones that are mounted with tabs on all four sides of each lamp. I wanted to try and do a smoked look and wanted to know where I could pick up spares if I don't like how it turns out. Here's an example assembly.

http://www.amazon.com/gp/aw/d/B0048...C_UL100_SR100,75_&refRID=1SBZ59M2XE768J3NST75

Any help identifying this part and where I can buy it is greatly appreciated.
 

Ghostbuster

Well-Known Member
Messages
862
Location
United States
Don't smoke the actually headlight! It will reduce output! You know how well you see at night while driving.

When I see someone with smoked out headlights I just laugh.

I have set of the complete turn signal assemblies that you can have if you pay shipping.
 

ZoroTheGreat

Well-Known Member
Messages
55
Location
La Verne, California
I should have clearified that I was only planning on smoking out the turn signals. Thank you for the offer I'll look into that. I just wanted to figure out what those lenses are called so I can buy them.
 

ZoroTheGreat

Well-Known Member
Messages
55
Location
La Verne, California
Don't smoke the actually headlight! It will reduce output! You know how well you see at night while driving.

When I see someone with smoked out headlights I just laugh.

I have set of the complete turn signal assemblies that you can have if you pay shipping.

I should have clearified that I was only planning on smoking out the turn signals. Thank you for the offer I'll look into that. I just wanted to figure out what those lenses are called so I can buy them.
 

CaddyStrophic

Well-Known Member
Messages
413
Location
United States
I'm currently retrofitting my headlights and replacing my corners with LEDs. I've taken everything and the previous comment is correct. It's sealed together and you don't really want to mess with it.

Just buy replacements and smoke them and bolt them in.

58c60228ec2ff102c3928b70d4692221.jpg


(Currently under construction.)

Sent from my Nexus 6 using Tapatalk
 

Burnoffski

Active Member
Messages
37
Location
Virginia
I'm currently retrofitting my headlights and replacing my corners with LEDs. I've taken everything and the previous comment is correct. It's sealed together and you don't really want to mess with it.

Just buy replacements and smoke them and bolt them in.

58c60228ec2ff102c3928b70d4692221.jpg


(Currently under construction.)

Sent from my Nexus 6 using Tapatalk

Looks pretty sweet!
 

Romeo

Well-Known Member
Messages
166
Location
New York City
I'm currently retrofitting my headlights and replacing my corners with LEDs. I've taken everything and the previous comment is correct. It's sealed together and you don't really want to mess with it.

Just buy replacements and smoke them and bolt them in.

58c60228ec2ff102c3928b70d4692221.jpg


(Currently under construction.)

Sent from my Nexus 6 using Tapatalk

What LEDs corners are those and how did you get those headlights to work? Send build thread if you have one, thanks. Looks good btw!
 

CaddyStrophic

Well-Known Member
Messages
413
Location
United States

H322

Well-Known Member
Messages
50
Location
Arkansas
I'm currently retrofitting my headlights and replacing my corners with LEDs. I've taken everything and the previous comment is correct. It's sealed together and you don't really want to mess with it.

Just buy replacements and smoke them and bolt them in.

58c60228ec2ff102c3928b70d4692221.jpg


(Currently under construction.)

Sent from my Nexus 6 using Tapatalk

Looked through your build may have overlooked it. But where did you order the headlight replacements? How was the install? Thanks
 

H322

Well-Known Member
Messages
50
Location
Arkansas
Thank you for response how did you mount them? How well do they work? I like the way they look a lot wouldn't mind doing this myself.


Sent from my iPhone using Tapatalk
 

CaddyStrophic

Well-Known Member
Messages
413
Location
United States
Thank you for response how did you mount them? How well do they work? I like the way they look a lot wouldn't mind doing this myself.


Sent from my iPhone using Tapatalk
If you go under the builds section, I have a thread there under "Devil's Night". The headlights aren't completely finished,yet.

The passenger side is pretty much done, and the driver's side housing is being molded right now.

But, yeah. The pics in my build thread should show what all needs to be done to mount these. (Spoiler, IT'S A TON OF WORK.)

Sent from my Nexus 6 using Tapatalk
 
Top